recentpopularlog in

ezequiel : jtag   5

Preparing Raspberry PI for JTAG Debugging – Sysprogs Tutorials
This tutorial shows how to prepare your Raspberry PI board for debugging with JTAG (we have tested this with Raspberry Pi 1, 2 and 3). Using JTAG will allow debugging the Linux kernel using hardware like Segger J-Link. As Raspberry PI board does not have a connector with a normal JTAG layout, preparing the board for JTAG debugging involves finding the correct pins and wiring them in the correct order. Follow the steps below for a complete walkthrough:
2018  blogpost  raspberrypi  jtag  debug  howto  guide  electronics  screenshots  software  windows  links  hardwaresupport 
5 weeks ago by ezequiel
I've Bricked My Netgear DG834G v3 - Please Help - OpenWrt Forum Archive
Q: I am hoping someone here more wise then me can help me unbrick my Netgear DG834G v3 Router.

Here are some details I have pulled from the router before I bricked it. [...]
forumthread  2009  router  hacking  firmware  links  issue  workaround  jtag  cli  example  linux  hardware  electronics 
5 weeks ago by ezequiel
OpenWrt Project: Netgear DG834G v4
[...] Also note that the Wifi chip for this router is the Broadcom BCM4318 chip and not the atheros. [...]
hardware  hardwaresupport  resources  info  links  cli  tool  linux  sysadmin  cpu  openwrt  router  atheros  installation  upgrade  howto  serialport  jtag 
5 weeks ago by ezequiel
UrJTAG - Universal JTAG library, server and tools
UrJTAG aims to create an enhanced, modern tool for communicating over JTAG with flash chips, CPUs, and many more. It takes on the well proven openwince jtag tools code. Future plans include conversion of the code base into a library that can be used with other applications. A flexible remote communication protocol that can be used over almost any type of serial link (including TCP/IP) is in the works.
2019  jtag  electronics  software  opensource  linux  raspbian  debug  debugger  documentation  hardwaresupport  raspberrypi 
5 weeks ago by ezequiel
OpenWrt Project: JTAG
JTAG stands for Joint Test Action Group, which is an IEEE work group defining an electrical interface for integrated circuit testing and programming.
jtag  article  wikientry  links  howto  guide  images  electronics  debug  hardware  hardwaresupport  sysadmin  programming  test  spec  tips  openwrt  router  raspberrypi 
7 weeks ago by ezequiel

Copy this bookmark:





to read