recentpopularlog in

ezequiel : raspberrypi   106

« earlier  
goncalomb/acestream-rpi: AceStream for Raspbian Lite
This project is an attempt at playing AceStreams on a Raspberry Pi 2/3 with Raspbian Lite without X.
It works with the AceStream Engine borrowed from Android, coupled with a HTTP proxy and the omxplayer.
github  raspberrypi  acestream  howto  source  scripts  streaming  hardwaresupport 
11 days ago by ezequiel
Serious HDMI Problems. What's that smell? Burning Raspberry! - Raspberry Pi Forums
Q: [...] I have just received my Neewer Black HDMI Input To VGA Adapter Converter For PC Laptop.

There was a post here: [...]

That reported it working and I have no reason to doubt that. However when I plugged mine in to my raspberry pi and VGA monitor the screen was black but lit i.e. the screen recognised a connection was present but wasn't receiving any data. A thin wisp of grey smoke appeared from the HDMI and the component labelled "D1" is looking like it has burn out. Suffice to say I very quickly removed it and all power! [...]
2012  forumthread  raspberrypi  hardware  hardwaresupport  electronics  issue  workaround  tips 
26 days ago by ezequiel
The purpose of this wiki is to preserve and present information about the development and use of Linux in embedded systems as well as open source projects and tools for general embedded development. To use this wiki, click on one of the portal links below.
wiki  resources  embedded  linux  tips  issue  workaround  links  booting  memory  power  powermanagement  multimedia  filesystem  networking  android  drivers  development  debug  kernel  security  legal  test  raspberrypi  hacking  hardware  hardwaresupport  tools  arduino  tutorials  cpu  spec  support 
26 days ago by ezequiel
neatsoft/rpi-edid-lock: Raspberry Pi EDID locker
This utility creates the edid.dat file and changes config.txt to fix Raspberry Pi hdmi configuration issues.

usage: [-l|-u]
-l - lock
-u - unlock
raspberrypi  hardwaresupport  tool  cli  booting  configuration  sysadmin  compatibility  issue  workaround  github  linux 
4 weeks ago by ezequiel
Support for HDMI 1 port (i.e. both ports)
Q: My understanding is that Kodi on Raspbian only supports one HDMI port, yet the Raspberry Pi 4 has two HDMI ports. [...]


Is it possible to get both HDMI ports working on the RPi 4? Apparently, this would need a code change in Kodi itself (PISink code block in Kodi).

Just to clarify, I only care about audio on the second port, but maybe somebody else has a need to video on that port too.
2019  forumthread  xbmc  raspberrypi  hardwaresupport  linux  configuration 
4 weeks ago by ezequiel
The Only Raspberry Pi 4 Kodi Tutorial You Will Ever Need
This tutorial (updated for Raspberry Pi 4) has everything you will ever need to know about using Kodi on the Raspberry Pi 4 mini computer.
raspberrypi  tutorial  osmc  libreelec  xbmc  configuration  install  installation  sysadmin  streaming  streamingaudio  howto  guide  screenshots  2020  blogpost  hardwaresupport  mediaplayer 
4 weeks ago by ezequiel
RPI falls back to 1280x720 from x1024. - Raspberry Pi Forums
Q: I have an HDMI->VGA converter module connected to my 'pi, as I have a bunch of TFT VGA monitors lying around, but no HDMI ones.

When I boot the 'pi with the cable attached, it comes up nicely in 1280x1024 as I told it to:


(hdmi_mode=35 is 1280x1024@60Hz in group 2)
However, somehow, the mode drops to a 60Hz 1280x720 mode when the monitor is not connected during boot. I was hoping to prevent these problems by specifying hdmi_force_hotplug=1, and directly specifying a mode that I want.
Why does it drop to a lower resolution if the monitor is not connected?
Just to be sure: the /proc/cmdline file shows "fbheight=720", so it is not my VGA converter that isn't booted correctly and somehow converting the 1280x1024 mode into 1280x720 (as if such a cheap piece of electronics would be capable of such a feat).
2012  forumthread  booting  configuration  sysadmin  linux  raspbian  raspberrypi  hardwaresupport  issue  workaround 
4 weeks ago by ezequiel
Conditional filters in config.txt - Raspberry Pi Documentation
When a single SD card (or card image) is being used with one Pi and one monitor, it is easy to set config.txt as required for that specific combination and keep it that way, amending it only when something changes.

However, if one Pi is swapped between different monitors, or if the SD card (or card image) is being swapped between multiple Pis, a single set of settings may no longer be sufficient. Conditional filters allow you to define certain sections of the config file to be used only in specific cases, allowing a single config.txt to create different configurations when read by different hardware.
raspberrypi  configuration  booting  sysadmin  raspbian  documentation  reference  online  linux 
4 weeks ago by ezequiel
raspi-config - Raspberry Pi Documentation
This page describes the console based raspi-config application. If you are using the Raspberry Pi desktop then you can use the graphical Raspberry Pi Configuration application from the Preferences menu to configure your Raspberry Pi.
raspberrypi  hardwaresupport  configuration  sysadmin  booting  links  tool  documentation  reference  raspbian 
4 weeks ago by ezequiel
[Tutorial] Show RPI's Temperature with a command. - Raspberry Pi Forums
A #1: [...] So i decided to make a quick Tutorial on how to show the Raspberry PI's Temperature.
Note: this is using the on-board sensor.

The command to do this is:

$ /opt/vc/bin/vcgencmd measure_temp


A #2: An alternative is to read /sys/class/thermal/thermal_zone0/temp on a recent Raspdian. Divide it by 1000 for degrees C.

$ cat /sys/class/thermal/thermal_zone0/temp
2013  raspberrypi  cli  tool  tips  example  forumthread  hardwaresupport  linux  links 
4 weeks ago by ezequiel
Kodi playback is choppy and laggy 400% kodi.bin usage - Raspberry Pi Forums
Q: Hello i think that after my last rpi-update suddenly i cannnot watch any video in kodi....either through my usb devices or iptv, netflix,etc.. i have rpi3b+ and kodi 18.3 (multimedia repo) with raspbian buster. The cpu usage is 100% with extreme temps. i set fake gl or full with no result..If i set legacy i have not X(in raspi-config).

A: Kodi Leia 18.3 for RPi4 with Raspbian Buster plays well , videos not choppy, audio (although HDMI and Analog only, DAC HATs not supported) also in sync with video.
gpu memory set at 264 [...]
xbmc  memory  forumthread  2019  issue  workaround  tips  releaserelated  raspberrypi  hardwaresupport  sysadmin  configuration  booting  linux  gpu 
4 weeks ago by ezequiel
Pi4 with 4Gb Ram. Setting max mem for GPU ? - Raspberry Pi Forums
Q: If possible, I'd like to set aside 1024Mb of the 4Gb memory available for GPU memory use.

I've tried adding the 'gpu_mem_1024' command in config.txt which then sees me with 64Mb on reboot.
I've tried setting the maximum setting in Raspberry Pi Configuration for GPU memory, which is "896"
which doesn't work either. On a couple of occassions I have had the system lock on reboot which required me to take the SD card out and edit config.txt externally. [...]
raspberrypi  memory  forumthread  2019  configuration  sysadmin  links  booting  gpu  performance 
4 weeks ago by ezequiel
[UPDATE] Kodi 18.4 Leia for Raspberry Pi 4 - Raspberry Pi Forums
Kodi 18.4 Leia built specifically for RPi 4 [...] with support for hardware decoding of HEVC (h.265) files.
2019  xbmc  releaserelated  raspberrypi  download  links  debianpkg  arm  hardwaresupport  codecs  forumthread 
4 weeks ago by ezequiel
aaaler/acestream-pi - dockerized Acestream for raspberry pi 2/3 arm armhf - Docker Hub
dockerized Acestream for raspberry pi 2/3 arm armhf


$ docker run --privileged --rm --name acestream -p 62062:62062 aaaler/acestream-pi --client-console --live-buffer 50 --max-connections 400 --max-peers 200
docker.container  acestream  p2p  streaming  raspberrypi  raspbian  arm  systemd  links 
5 weeks ago by ezequiel
vcgencmd - Raspberry Pi Documentation
vcgencmd is a command line utility that can get various pieces of information from the VideoCore GPU on the Raspberry Pi. Much of the information available is only of use to Raspberry Pi engineers, but there are a number of very useful options available to end users that will be described here.
cli  tool  raspberrypi  hardwaresupport  gpu  linux  debian  sysadmin  documentation  reference  example 
5 weeks ago by ezequiel
wiringPi updated to 2.52 for the Raspberry Pi 4B | Wiring Pi
Just a quick post to let you know that you’ll need a new wiringPi for the Raspberry Pi 4B.

To upgrade:

cd /tmp
sudo dpkg -i wiringpi-latest.deb

Check with:

gpio -v

and make sure it’s version 2.52. I’ll push the updated sources shortly.

It will hopefully be part of the official release soon, but for now this will do.
2019  blogpost  raspberrypi  hardwaresupport  compatibility  packages  sysadmin  debianpkg  software  cli  raspbian  links  download 
5 weeks ago by ezequiel
The GPIO utility | Wiring Pi
WiringPi comes with a separate program to help manage the on-board GPIO interface as well as additional modules such as the PiFace and other devices like the Gertboard as well as generic GPIO expander type devices.
raspberrypi  development  electronics  hardwaresupport  manpage  documentation  raspbian  linux  example  cli  tool  sysadmin 
5 weeks ago by ezequiel
Can't resize or move windows on Raspberry Pi - Stack Overflow
Q: I am using the Raspberry Pi Model 3 B+ and there was recently an update( I did not record what it was doing or what it was called) and upon reboot it mentioned that there was a previous version saved somewhere(did not take note of where this was at). Not thinking much of the update I tried to move windows around and they would not move. I found to try the Alt button and dragging and that is not working.
2018  2019  forumthread  raspberrypi  lxde  windowmanager  issue  workaround  stackexchange  raspbian  x11 
5 weeks ago by ezequiel
HDMI Configuration - Raspberry Pi Documentation
In the vast majority of cases, simply plugging your HDMI-equipped monitor into the Raspberry Pi using a standard HDMI cable will automatically lead to the Pi using the best resolution the monitor supports. The Raspberry Pi Zero uses a mini HDMI port, so you will need a mini-HDMI-to-full-size-HDMI lead or adapter. On the Raspberry Pi 4 there are two micro HDMI ports, so you will need either one or two micro-HDMI-to-full-size-HDMI leads or adapters, depending on how many displays you wish to attach. You should connect any HDMI leads before turning on the Raspberry Pi.
raspberrypi  hardware  hardwaresupport  configuration  sysadmin  booting  linux  raspbian  documentation  example  links  tips 
5 weeks ago by ezequiel
Television via Acestream on Raspberry PI. Now in docker containers
On Habré, AceStream was repeatedly mentioned: a technology that provides the user access to video streams using the AceStream private P2P protocol, the so-called. torrent tv. AceStream provides access to a distributed content delivery network, i.e. watching the channel, the user transmits data to other users, which allows to drastically reduce the cost of services.
2016  blogpost  acestream  install  raspberrypi  osmc  raspbian  docker.container  sysadmin  howto  links  proxy  github  screenshots  xbmc  configuration 
5 weeks ago by ezequiel
Installing snap on Raspbian | Snapcraft documentation
Snap can be installed on a Raspberry Pi running the latest version of Raspbian by opening a terminal and typing a couple of commands.
snap  howto  sysadmin  install  installation  raspberrypi  raspbian  linux  linux.containers 
5 weeks ago by ezequiel
Preparing Raspberry PI for JTAG Debugging – Sysprogs Tutorials
This tutorial shows how to prepare your Raspberry PI board for debugging with JTAG (we have tested this with Raspberry Pi 1, 2 and 3). Using JTAG will allow debugging the Linux kernel using hardware like Segger J-Link. As Raspberry PI board does not have a connector with a normal JTAG layout, preparing the board for JTAG debugging involves finding the correct pins and wiring them in the correct order. Follow the steps below for a complete walkthrough:
2018  blogpost  raspberrypi  jtag  debug  howto  guide  electronics  screenshots  software  windows  links  hardwaresupport 
5 weeks ago by ezequiel
UrJTAG - Universal JTAG library, server and tools
UrJTAG aims to create an enhanced, modern tool for communicating over JTAG with flash chips, CPUs, and many more. It takes on the well proven openwince jtag tools code. Future plans include conversion of the code base into a library that can be used with other applications. A flexible remote communication protocol that can be used over almost any type of serial link (including TCP/IP) is in the works.
2019  jtag  electronics  software  opensource  linux  raspbian  debug  debugger  documentation  hardwaresupport  raspberrypi 
5 weeks ago by ezequiel
Automatically Control Your Raspberry Pi Fan and Temperature - howchoo
Since the Raspberry Pi 4 was released, many have noticed that it can get pretty hot, especially when the CPU is under heavy load.
raspberrypi  electronics  howto  guide  python  gpio  images  blogpost  2020  links  hardwaresupport 
5 weeks ago by ezequiel
Add an addition persistent route on eth0 - Raspberry Pi Forums
Q: [...] I have tried adding a route command to dhcpcd.conf in a section called interface eth0 but as that interface is assigned dynamically I don't think it is read.

I would be happy to find a simple command line solution as I can script it to run when I want.
2018  raspberrypi  raspbian  dhcp  configuration  networking  sysadmin  howto  tips  links  forumthread  cli  example 
6 weeks ago by ezequiel
OpenWrt Project: JTAG
JTAG stands for Joint Test Action Group, which is an IEEE work group defining an electrical interface for integrated circuit testing and programming.
jtag  article  wikientry  links  howto  guide  images  electronics  debug  hardware  hardwaresupport  sysadmin  programming  test  spec  tips  openwrt  router  raspberrypi 
7 weeks ago by ezequiel
Tutorials and Howtos - Alpine Linux
Welcome to Tutorials and Howtos, a place of basic and advanced configuration tasks for your Alpine Linux.

The tutorials are hands-on and the reader is expected to try and achieve the goals described in each step, possibly with the help of a good example. The output in one step is the starting point for the following step.

Howtos are smaller articles explaining how to perform a particular task with Alpine Linux, that expects a minimal knowledge from reader to perform actions.
alpine  linux  distro  howto  tips  links  wiki  wikientry  articles  tutorials  faq  sysadmin  configuration  raspberrypi  powerpc  networking  powermanagement  laptop  desktop 
9 weeks ago by ezequiel
linuxserver/ddclient - Docker Hub
Ddclient is a Perl client used to update dynamic DNS entries for accounts on Dynamic DNS Network Service Provider. It was originally written by Paul Burry and is now mostly by wimpunk. It has the capability to update more than just dyndns and it can fetch your WAN-ipaddress in a few different ways.
docker.container  remote  tcpip  internet  cli  tool  automation  scripting  sysadmin  amd64  arm  raspberrypi  example  documentation  howto  releaserelated  2019 
10 weeks ago by ezequiel
Nginx as forward proxy for HTTPS - Super User
Q: While I was able to successfully configure nginx to proxy HTTP traffic (using this guide), all attempts to proxy HTTPS requests resulted in code 400 (Bad Request). [...]

A: If you don't mind compiling nginx from source, you could install ngx_http_proxy_connect_module. The following worked for me in Debian 9 "Stretch" on a Raspberry Pi (after I added deb-src URLs to /etc/apt/sources.list and did apt-get update): [...]
2013  forumthread  stackexchange  nginx  extension  build  howto  proxy  privacy  tls  ssl  http  configuration  example  tips  links  linux  debian  raspbian  raspberrypi  docker.container 
11 weeks ago by ezequiel
What to do with 4 old sata drives? - Raspberry Pi Forums
Q: I have 4 old internal 80Gb sata drives, not much value in them, but they're all identical and good quality. So why not build a raid I hear you say! Well, I was thinking the same thing. [...]
raspberrypi  harddisk  hardwaresupport  usb  power  hardware  raid  forumthread  2017  tips  embedded 
october 2019 by ezequiel
Advanced MAME Launcher - MAME frontend for Kodi
Advanced MAME Launcher is a MAME front-end for Kodi. It supports both MAME arcade ROMs plus Software Lists (about 100.000 ROMs in total).
mame  xbmc  software  links  download  resources  info  faq  gaming  raspberrypi  linux  unix 
july 2019 by ezequiel
[HowTo] Retrosmc - Retrogaming on OSMC with EXT USB Drive - HowTo - OSMC Forums
If you’re like me, you have a lacking space SDCard in your RPi running OSMC as all you ever do is stream content, but now you want to play some ROMs. If you try to install full RetroPie, you will run out of space and OSMC will panic and die with no space left.

So I decided to do a few quick & easy edits, to make it install to a USB Drive, plugged in to a connected powered USB hub. [...]
retro  osmc  installation  configuration  howto  tips  sysadmin  linux  raspberrypi  gaming  usb  partition  guide  example 
july 2019 by ezequiel
Latest HowTo topics - OSMC Forums
This section has been provided for users to provide useful [HowTo] instructional posts for the benefit of the community as a whole. Though we are unable to officially support any of the tutorials provided by users here… [...]
osmc  howto  guide  tutorials  raspberrypi  xbmc  configuration  installation 
july 2019 by ezequiel
Backing up Settings - General - OSMC
It’s important to keep your OSMC system backed up. This will make it easy to upgrade your OSMC device, move settings to another system and ensure peace of mind.
osmc  raspberrypi  backup  howto  xbmc  wikientry  documentation  mediaplayer 
june 2019 by ezequiel
Home Assistant
Open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server.
home.appliance  automation  opensource  raspberrypi  resources  links  info  example 
june 2019 by ezequiel
How to change Wi-Fi password? - Help and Support / Raspberry Pi - OSMC Forums
My OSMC setup was doing well and then yesterday I changed my Wi-Fi password for security reasons and wanted to change it on my Raspberry Pi using the GUI with My OSMC but the connexion times out when I try to enter the new password and I can not forgot my WiFi network within My OSMC …
2017  raspberrypi  networking  raspbian  configuration  wifi  security  sysadmin  howto  tips  forumthread 
june 2019 by ezequiel
Setting up your network connection - General - OSMC
Before installing OSMC
As part of the OSMC installer you can specify networking options and as part of the first boot the system will attempt to configure them

To do this on the page after you have selected where you want OSMC installed you can select wired connection or wireless connection. By default both wired and wireless connection will default to DHCP configuration.
osmc  networking  tcpip  dns  configuration  tips  sysadmin  example  screenshots  article  installation  wifi  raspberrypi 
june 2019 by ezequiel
OSMC Vs. OpenELEC Vs. LibreELEC – Kodi Operating System Comparison - Jerry_Jin - 博客园
Kodi’s two slim-and-trim kid brothers LibreELEC and OpenELEC were once great solutions for getting the most out of limited hardware. But now that even the cheapest Kodi boxes are more than powerful enough to run the deluxe Kodi operating system known as OSMC, are LibreELEC and OpenELEC are becoming irrelevant?
osmc  libreelec  openelec  article  blogpost  comparison  2018  raspberrypi  xbmc  review  links  history  player  streaming  streamingaudio  tv  sports  os 
june 2019 by ezequiel
mprasil/dokuwiki - Docker Hub
Container running DokuWiki with nice URLs and xsendfile enabled, also includes LDAP support.
(me: 'docker build' successfully builds a raspbian container)
docker  docker.container  wikiengine  container  linux  x86  amd64  source  bitbucket  raspberrypi  raspbian  arm  links  dokuwiki 
june 2019 by ezequiel
Docker on Raspbian
Remove some warnings
If you run docker info, you will see some warnings at the end of the display: [...]
raspberrypi  raspbian  hardwaresupport  kernel  info  tips  sysadmin  configuration  docker  example  booting  workaround  issue 
june 2019 by ezequiel
Setting up an NGINX web server on a Raspberry Pi - Raspberry Pi Documentation
NGINX (pronounced engine x) is a popular lightweight web server application you can install on the Raspberry Pi to allow it to serve web pages.

Like Apache, NGINX can serve HTML files over HTTP, and with additional modules can serve dynamic web pages using scripting languages such as PHP.
nginx  raspberrypi  webserver  installation  howto  guide  sysadmin  raspbian  php  configuration  example  documentation  tips  cli 
may 2019 by ezequiel
raspbian - How do I set up networking/WiFi/static IP address? - Raspberry Pi Stack Exchange
A: This tutorial describes how to setup networking using the default network manager dhcpcd included in Raspbian since 2015-05-05.
It applies to the Foundation releases of Raspbian Stretch, Raspbian Jessie and the last Raspbian Wheezy. [...]
raspbian  raspberrypi  networking  sysadmin  linux  debian  howto  tips  example  links  configuration  dhcp  wifi  dns  stackexchange  forumthread  2015 
may 2019 by ezequiel
Filter Content on Your Home Network with E2guardian | | The source for Linux information
[...] E2guardian works in conjunction with another caching proxy (e.g., Squid) and offers all the features you’d need in a home network content filter: [...]
proxy  configuration  blogpost  2015  howto  guide  sysadmin  networking  linux  debian  ubuntu  raspberrypi  raspbian  installation  e2guardian 
may 2019 by ezequiel
Raspbian "stretch" for Raspberry Pi 3 on QEMU · wimvanderbauwhede/limited-systems Wiki
This tutorial explains how to run the Raspbian Linux distribution for the Raspberry Pi 3 on QEMU, a generic and open source machine emulator and virtualizer.

QEMU supports many physical hardware platforms, and has recently added support for the Raspberry Pi 3 with the raspi3 model. However, there is currently no emulation of the BCM2835 USB controller, so there is no USB support and also, more critically, no networking support. Furthermore, the raspi3 model only works for 64-bit linux kernels, and the Raspbian kernel is 32-bit.
raspberrypi  qemu  wikientry  howto  tips  configuration  booting  linux  raspbian  sysadmin  networking  arm 
may 2019 by ezequiel
Arm Raspbian Jessie package - e2guardian - Google Groups
Q: [...] it would be good if somebody had the resources/time to run some tests to get some basic benchmarks of what's possible on a pi3. [...]
raspberrypi  forumthread  links  arm  downloads  packages  tips  example  proxy  security  raspbian  e2guardian 
may 2019 by ezequiel
download:start [X2Go - everywhere@home]
X2Go consists of several software components. The minimal requirement is X2Go Server (on the terminal server) and X2Go Client / PyHoca-GUI (on the client machine).

The minimal X2Go setup installs out of the box. But note that X2Go can be highly customized by a series of X2Go add-on components.
x2go  downloads  download  macosx  linux  debian  raspberrypi  ubuntu  suse  fedora  redhat  centos  packages  links  remote  nx 
august 2017 by ezequiel
RetroPie - Retro-gaming on the Raspberry Pi
Welcome to RetroPie. RetroPie allows you to turn your Raspberry Pi or PC into a retro-gaming machine. It builds upon Raspbian, EmulationStation, RetroArch and many other projects to enable you to play your favourite Arcade, home-console, and classic PC games with the minimum set-up. For power users it also provides a large variety of configuration tools to customise the system as you want.
diy  emulation  emulator  raspberrypi  hardwaresupport  gaming  distro  linux  opensource  commodore  raspbian 
december 2016 by ezequiel
How to Build a Raspberry Pi Retro Game Console for $35
Since its release, the $35 Raspberry Pi mini-computer has been hailed as the perfect all-in-one retro game console. Now, it’s easier to do than ever, and it doesn’t take any Linux knowledge whatsoever. Here’s how to make your own retro game console in under 10 minutes.
emulation  gaming  hardware  hardwaresupport  howto  tutorial  blogpost  2016  raspberrypi  retro  links  commodore  mame 
december 2016 by ezequiel
PiPlay (formerly PiMAME) | Gaming and Emulators for the Raspbery Pi | Shea Silverman
This is the official site of PiPlay, formerly called PiMAME. The pre built Raspberry Pi OS made for gaming and emulation.
games  gaming  mame  raspberrypi  downloads  opensource  emulation  commodore  retro 
december 2016 by ezequiel
Void Linux - Enter the void
Void is a general purpose operating system, based on the monolithic Linux® kernel. Its package system allows you to quickly install, update and remove software; software is provided in binary packages or can be built directly from sources with the help of the XBPS source packages collection.

It is available for the Intel x86®, ARM® and MIPS® processor architectures; Software packages can be built natively or cross compiling through the XBPS source packages collection.
distro  links  voidlinux  arm  raspberrypi  x86  freesoftware  license.gpl  news  mips  downloads  documentation  reference 
july 2016 by ezequiel Void
Void is an independently-developed, general-purpose operating system based on the monolithic Linux kernel. It features a hybrid binary/source package management system which allows users to quickly install, update and remove software, or to build software directly from sources with the help of the XBPS source packages collection. Other features of the distribution include support for Raspberry Pi single-board computers (both armv6 and armv7), rolling-release development model with daily updates, integration of OpenBSD's LibreSSL software, and native init system called "runit".
distro  links  voidlinux  arm  raspberrypi  x86  freesoftware  license.gpl  news  mips 
july 2016 by ezequiel
Home · dhruvvyas90/qemu-rpi-kernel Wiki
Emulation is a necessary aspect of embedded system development and QEMU is the right open source tool to do so for linux based SBCs.
qemu  github  raspberrypi  howto  guide  tips  kernel  linux  debian  partition  emulation  embedded  arm 
april 2016 by ezequiel
Emulating Jessie image with 4.1.x kernel · dhruvvyas90/qemu-rpi-kernel Wiki
To emulate Jessie image with 4.1.7 kernel in this repo, steps differ slightly compared to a lot of (and standard) wheezy emulating guides on the internet.
qemu  github  raspberrypi  howto  guide  tips  kernel  linux  debian  partition  emulation  embedded  arm 
april 2016 by ezequiel
qemu-rpi-kernel/tools at master · dhruvvyas90/qemu-rpi-kernel
In this subsection, I've included tools and instructions for those who want to build kernel themselves.
build-kernel-qemu script helps one to automate kernel building process for any debian based distro.
For other OSes, like windows or Mac OS X, one can have similar tools like gcc-arm-linux-gnueabihf- and other dependencies and refer build-kernel-qemu line by line to build the kernel.
qemu  github  links  kernel  linux  howto  scripts  guide  arm  patches  raspberrypi  embedded 
april 2016 by ezequiel
kernel - Emulating raspbian with QEMU - Raspberry Pi Stack Exchange
I'm trying to emulate raspbian on QEMU and there're plenty of guides available on internet. However, every guide points to download qemu-linux kernel from link however, this link is dead and I was unable to find an alternative link. Is there any alternative link to the kernel or guide how to compile kernel from source to use it for emulation?
raspberrypi  qemu  emulation  tips  links  kernel  linux  debian  forumthread  stackexchange  raspbian 
april 2016 by ezequiel
Raspberry Pi • View topic - HOWTO: Virtual Raspbian on Qemu in Ubuntu Linux 12.10
It's a pretend Raspberry Pi, running completely in software, on your desktop, that you can use as if it is a real one (minus the ports and GPIO obviously). LXDE (Desktop) runs, and the internet/network is connected. You can SSH into it, make copies of it, trash it, start a new one from a previous saved copy, and generally do pretty much anything software-wise with it that you would do with a real one.
forumthread  raspberrypi  2013  howto  install  qemu  linux  debian  ubuntu.quantal  ubuntu  links  tutorial  sysadmin  hardwaresupport  emulation  raspbian 
march 2016 by ezequiel
Emulating The Raspbian Using QEMU | Unixmen
In this article we will explain for you how Rasbian (based on Debian) is emulating under QEMU.
article  qemu  raspberrypi  debian  linux  emulation  tutorial  screenshots  howto  booting  hardwaresupport  x11  raspbian 
march 2016 by ezequiel
Full Raspberry Pi (Raspbian) emulation with qemu | Paul Scott
I wanted to do some experimental hacking on my Raspberry Pi, specifically to try a bit of fun with talking to Arduino and Spark Cores.
raspberrypi  hardwaresupport  sysadmin  configuration  tutorial  howto  article  linux  debian  embedded  qemu  ubuntu  emulation  raspbian 
march 2016 by ezequiel
Raspberry Pi Emulation for Windows with QEMU |
A Raspberry Pi emulation is a great way to try the Raspbian environment without buying a Raspberry Pi or Raspberry Pi 2 first.
article  guide  raspberrypi  howto  emulator  windows  linux  debian  screenshots  tutorial  2015  qemu  raspbian 
march 2016 by ezequiel
How to Emulate a Raspberry Pi on Your PC
Rather than buy a Raspberry Pi and be disappointed, why not try the QEMU emulator to get a feel for it first?
article  guide  raspberrypi  howto  emulator  windows  linux  debian  screenshots  tutorial  2015  qemu 
march 2016 by ezequiel
Enabling KVM virtualization for Raspberry Pi 2 – flexVDI
As I wrote on my previous post, Enabling HYP mode on the Raspberry Pi 2, the newest machine from the Raspberry Pi Foundation features a Cortex-A7 with Virtualization Extensions, but it isn’t possible to make use of such feature out of the box.

In that article I showed that it was possible to start the kernel in HYP mode. Now, I’ll cover the rest of steps needed for enabling KVM virtualization and running your first guest OS.
raspberrypi  2015  howto  guide  hardwaresupport  virtualisation  kvm  article  kernel  linux  qemu  configuration  sysadmin  embedded 
march 2016 by ezequiel
RaspbianFAQ - Raspbian
The goal of Raspbian is to become the leading OS of choice for all users of the Raspberry Pi. This goal has been largely achieved. There are still some rough edges but these are generally more related to the Pi's hardware and kernel than Raspbian itself.
raspberrypi  linux  debian  faq  embedded  os  distro  documentation  raspbian 
march 2016 by ezequiel
0xabu/qemu: qemu with Raspberry Pi 2 and Windows on ARM support
(me: microsoft-sponsored fork of qemu that is able to run windows 10 (embedded) on the raspberry pi -- this could be useful to run linux on the raspberry pi, too)
qemu  raspberrypi  microsoft  unix  linux  github  source  embedded  emulation  arm 
march 2016 by ezequiel
« earlier      
per page:    204080120160

Copy this bookmark:

to read