recentpopularlog in

ezequiel : wifi   121

« earlier  
ndiswrapper / Wiki / Troubleshooting_HowTo
If things are not working as expected, follow instructions below.

* Make sure you have latest stable version installed; see downloads for latest versions available. Run ndiswrapper -v to check that you indeed have latest version. Follow instructions in Installation to install. You may want to Uninstall and install again if you think there is a problem with your current installation or you have older version. [...]
ndiswrapper  issue  workaround  tips  wikientry  linux  driver  drivers  sysadmin  wifi  networking  hardwaresupport  links 
4 days ago by ezequiel
ndiswrapper / Wiki / HowTos
This page contains general information on setting up Ndiswrapper in general. If you have an article or information pertaining to a specific network device then please add it to that device's page.
ndiswrapper  howto  tips  linux  wifi  driver  drivers  arch  centos  debian  gentoo  knoppix  slackware  slitaz  suse  opensolaris  ubuntu  eeepc  links  online 
4 days ago by ezequiel
OpenWrt Project: Wi-Fi /etc/config/wireless
The wireless radio UCI configuration is located in /etc/config/wireless.
If the device has ethernet ports, the wireless is turned OFF by default. You can turn it on in /etc/config/wireless by changing option disabled '1' to option disabled '0' (commenting out the line or removing it is sufficient).
openwrt  documentation  wifi  configuration  sysadmin  example  unix  linux  networking  tips  reference  hardwaresupport  security 
4 days ago by ezequiel
Clients in same WLAN can't reach each other - Installing and Using OpenWrt / Network and Wireless Configuration - OpenWrt Forum
Q: Ethernet switch + 2.4G Wifi + 5G Wifi is bridged into one interface and firewall zone (lan).
I updated to LEDE 17.01.0 (stable) and got following problem:
Clients connected to the same Wifi SSID can not communicate with each other (same interface/firewall zone)
PING OPO.lan (192.168.0.17) 56(84) bytes of data. From MJ.lan (192.168.0.58) icmp_seq=1 Destination Host Unreachable ...
I can still reach it from Ethernet or from the other WLAN (5G -> 2.4G and vice versa) but not when both are connected to the same... It works fine if i create 2 different SSIDs on an adapter and put a client in each one.
Multiple clients connected through ethernet can also reach all others.
forumthread  openwrt  wifi  networking  firewall  configuration  issue  workaround  links  router  sysadmin  tips 
4 days ago by ezequiel
Is there any support with a NetGear WNA3100 USB Adapter in Ubuntu 12.10? - Ask Ubuntu
Q: Has there been any changes or updates or additions to Ubuntu 12.10's to pick up a NetGear WNA3100 USB Adapter? Or software updates? Or what can I do to get it to work in the latest Ubuntu 12.10? [...]
ubuntu.precise  forumthread  2012  hardwaresupport  drivers  ndiswrapper  issue  links  usb  wifi 
10 days ago by ezequiel
TL-WDN3200 | N600 Wireless Dual Band USB Adapter | TP-Link
* Supports Dual-Band (IEEE 802.11b/g/n 2.4GHz, IEEE 802.11a/n 5 GHz)
* Maximum speed up to 2.4GHz 300Mbps and 5GHz 300Mbps
* USB 2.0 interface
* Easy wireless security encryption at a push of the WPS button
wifi  tp-link  hardware  spec  downloads  support  hardwaresupport  links  windows  windows7  windows8  windowsvista  windowsxp  drivers  driver  download  tools  faq 
12 days ago by ezequiel
Power management/Suspend and hibernate - ArchWiki
Currently there are three methods of suspending available: suspend to RAM (usually called just suspend), suspend to disk (usually known as hibernate), and hybrid suspend (sometimes aptly called suspend to both): [...]
powermanagement  arch  linux  sysadmin  configuration  kernelmodule  kernel  booting  udev  example  tips  laptop  systemd  tools  acpi  workaround  issue  webcam  cpu  wifi  harddisk  networking  links  wikientry 
21 days ago by ezequiel
Power management - ArchWiki
Power management is a feature that turns off the power or switches system's components to a low-power state when inactive.

In Arch Linux, power management consists of two main parts:

* Configuration of the Linux kernel, which interacts with the hardware.
* Kernel parameters
* Kernel modules
* udev rules

* Configuration of userspace tools, which interact with the kernel and react to its events. Many userspace tools also allow to modify kernel configuration in a "user-friendly" way. See #Userspace tools for the options.
powermanagement  arch  linux  sysadmin  configuration  kernelmodule  kernel  booting  udev  example  tips  laptop  systemd  tools  acpi  workaround  issue  webcam  audio  pulseaudio  cpu  bluetooth  wifi  harddisk  networking  cd  dvd  links  wikientry 
21 days ago by ezequiel
[SOLVED] Hibernate, 15.10, 16.04, Unity, systemd, tlp, wifi module reload, tuxonice
I thought I should share this in case anyone else has the similar problem and wants to know how to solve it. With the new systemd configuration, the Unity menu's "hibernate" option does not call on pm-hibernate. It instead uses the hibernate and sleep service of logind / systemd. I'm using a tuxonice kernel, and the tlp power management setup on a thinkpad w520, running Ubuntu 16.04 (devel). I think this article is still relevant even if you don't have tlp or tuxonice, since it's systemd that changes how suspend and hibernate work.

When this laptop suspends or hibernates, sometimes the wifi stops working when it wakes back up. The solution is to unload the wifi device driver module prior to sleep, and then reload it upon resume, the way the "hibernate" script does, and "pm-hibernate" also did.
2016  forumthread  sysadmin  linux  powermanagement  script  scripts  example  kernelmodule  systemd  tips  cli  configuration  ubuntu  ubuntu.xenial  wifi 
21 days ago by ezequiel
WNA3100 (N300) Wireless USB Adapter Support | NETGEAR
(me: ndiswrapper has issues when dealing with the windows xp (32 bit) driver on Linux kernel >= 5.0 (mint 19.3 has 5.3.0 as of 2020.03.08))
wifi  driver  windows  windowsxp  windows7  windowsvista  windows8  windows10  hardwaresupport  networking  ndiswrapper  downloads  firmware  documentation  support  reference  manual  guide  issue  workaround  hardware 
21 days ago by ezequiel
internet - Netgear N-300/ WNA3100 USB Adapter for Ubuntu 16.04 - Ask Ubuntu
Q: I am new to Linux and Ubuntu and I am having trouble connecting to the Internet.

I have a netgear WNA3100 USB Adapter and I don't have anything in my additional drivers.

A: You can add Support for the Netgear N-300/ WNA3100 USB Adapter by installing the ndiswrapper and loading the Windows network driver. [...]

(me: ndiswrapper fails to build when using kernel-headers >= 5.0 (on i686), then (even if patched) the 32-bit WinXP driver from NetGear does not work: ndiswrapper causes an "oops" because of the "nx" cpu protection bit; then, after disabling this (see another link saved today), ndiswrapper gives yet another error. Result (so far): failed).
ndiswrapper  issue  howto  guide  tips  example  cli  sysadmin  networking  wifi  2016  ubuntu  configuration  usb  driver  drivers  windows  links  linux  kernelmodule  forumthread  stackexchange 
23 days ago by ezequiel
Ubuntu - Fix for Slow Wireless Internet Connection Speed after upgrading to 11.04 Natty Narwhal - HitXP
Recently Ubuntu came out with its newest version 11.04 code named Natty Narwhal, and after upgrading my earlier 10.10 version Maverick to this new Version of Ubuntu, I faced my first real issue with Ubuntu in so many years – My USB Wireless Internet Connection speed had almost come to a standstill like a slow dial up connection after upgrading Ubuntu to 11.04! The connection was n times weaker than Windows based systems running on same wireless connection. Many a times it even simply dropped Internet connections. [...]
ubuntu.natty  ubuntu  configuration  sysadmin  networking  wifi  usb  performance  powermanagement  dns  tips  issue  workaround  example  cli  scripting  linux  blogpost  2011 
23 days ago by ezequiel
linux - How to turn off Wireless power management permanently - Unix & Linux Stack Exchange
Q: In Linux Mint 17.3 / 18 iwconfig says the power management of my wireless card is turned on. I want to turn it off permanently or some workaround on this issue.

sudo iwconfig wlan0 power off works, until I reboot the laptop.

Also, if I randomly check iwconfig, sometimes it's on, despite I did run this command. [...]

A #1: Open this file with your favorite text editor, I use nano here:

sudo nano /etc/NetworkManager/conf.d/default-wifi-powersave-on.conf

By default there is:

[connection]
wifi.powersave = 3

Change the value to 2. Reboot for the change to take effect. [...]
2016  forumthread  stackexchange  linux  ubuntu  mint  debian  networking  software  configuration  sysadmin  powermanagement  usb  issue  workaround  cli  links  documentation  tips  example  wifi 
23 days ago by ezequiel
FS#1960 : hostapd/netifd: multicast_to_unicast/hairpin not set for dynamic vlan, ap not in isolate mode
I noticed that multicast_to_unicast and hairpin_mode are not set on the dynamically created wlan interfaces, and the wireless ap is not running in isolate mode. This is because these interfaces are created by hostapd, unlike other wlan interfaces which are created from netifd/system-linux.

The attached patch fixes this:
- it sets ap_isolate for the hostapd interface, if the interface is using dynamic vlan
- it sets multicast_to_unicast and hairpin_mode after the dynamic interface is created

I haven’t handled the case where the isolate option is not set for the wifi interface, or where multicast_to_unicast is not set on the bridge, since this requires passing additional information to hostapd, and I wasn’t sure what the preferred way to do this would be. I’d probably overload the ap_isolate option to have value 2 mean that multicast_to_unicast and hairpin_mode should be set.
wifi  networking  openwrt  issue  workaround  forumthread  configuration  2018  patches 
27 days ago by ezequiel
FS#714 : ARP/Broadcast does not reach other clients in the same WLAN
I have the default bridge with ethernet and WLAN in it. When i try to send data from a client to another, both connected to the same WLAN SSID, it doesn’t work (Destination unreachable).
Wireshark shows that it sends endless ARP requests to Broadcast, but the other clients in that WLAN never get it (and therefore can’t answer). The broadcast gets still delivery to every client connected through Ethernet. If i create a second WLAN SSID (even on the same adapter) and and add it to the bridge, it gets also all broadcast packets from the other WLAN...
So if i put the 2 clients in different WLAN SSIDs or ethernet they get the broadcast from each other, but not when both are connected to the same.
wifi  networking  openwrt  issue  workaround  forumthread  configuration  2017 
27 days ago by ezequiel
wpa_supplicant / hostapd: Developers' documentation for wpa_supplicant and hostapd
The goal of this documentation and comments in the source code is to give enough information for other developers to understand how wpa_supplicant and hostapd have been implemented, how they can be modified, how new drivers can be supported, and how the source code can be ported to other operating systems. If any information is missing, feel free to contact Jouni Malinen j@w1.fi for more information. Contributions as patch files are also very welcome at the same address. Please note that this software is licensed under the BSD license (the one with advertisement clause removed). All contributions to wpa_supplicant and hostapd are expected to use compatible licensing terms.
wifi  documentation  reference  api  online  links  linux  bsd  freebsd  windows  networking 
27 days ago by ezequiel
en:users:documentation:hostapd [Linux Wireless]
hostapd is an IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator. This page is dedicated to the Linux documentation of its implementation and use. Please refer to the hostapd home page for information for other Operating Systems.

To communicate with a kernel driver, hostapd has to use some interface. All new cfg80211 (and mac80211) based drivers that implement AP functionality are supported using the nl80211 interface.
wifi  linux  kernel  kernelmodule  documentation  links  atheros  development  networking  wikientry  reference  example  cli  tools  tool  sysadmin  configuration  tips  guide  security 
27 days ago by ezequiel
welcome [Linux Wireless]
This is the main source of Documentation for the Linux wireless (IEEE-802.11) subsystem. This wiki features information for end-users, developers and vendors.

This site covers all the new 802.11 drivers, the new core mac80211 and cfg80211 components along with the new userspace and in-kernel nl80211 configuration interface. New nl80211 userspace applications are also documented.
wifi  wireless  linux  kernel  kernelmodule  documentation  reference  wiki  articles  api  drivers  hardwaresupport  networking 
27 days ago by ezequiel
Hostapd - Gentoo Wiki
Hostapd (Host access point daemon) is a user space software access point capable of turning normal network interface cards into access points and authentication servers. The current version supports Linux (Host AP, madwifi, mac80211-based drivers) and FreeBSD (net80211).
wifi  router  networking  example  configuration  gentoo  wikientry  security  sysadmin  links  linux  compatibility  reference 
27 days ago by ezequiel
hostapd: IEEE 802.11 AP, IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator
hostapd is a user space daemon for access point and authentication servers. It implements IEEE 802.11 access point management, IEEE 802.1X/WPA/WPA2/EAP Authenticators, RADIUS client, EAP server, and RADIUS authentication server. The current version supports Linux (Host AP, madwifi, mac80211-based drivers) and FreeBSD (net80211).
networking  wifi  unix  linux  freebsd  sysadmin  software  security  openwrt  router  kernelmodule 
27 days ago by ezequiel
Get the best out of you battery on linux : linux
[...] I noticed that battery life in Linux (Linux Mint 19.1 Cinnamon in my case) is WAY worse than in windows 10, I use my laptop more often to watch TV shows and movies and to browse the internet.

I have a small battery in my laptop, The battery when I'm using mint can't make it over 2 hours of light usage, while in windows 10 with same light usage the battery can make it over 4-4.5 hours. [...]
forumthread  reddit  powermanagement  optimisation  linux  ubuntu  software  tips  sysadmin  configuration  links  howto  guide  tool  tools  cli  wifi  networking  usb  laptop  battery  cpu  memory  2018  hardwaresupport  mint  desktop 
28 days ago by ezequiel
(Solved) Flaky wifi with WRT1900ACS v2 and Android phones - Installing and Using OpenWrt - OpenWrt Forum
Q: I have a wrt1900acs v2 running the latest wifi drivers packaged by @eduperez and it is giving me nothing but problems.

Specifically my Android phones simply refuse to stay connected. Recently it's gotten to the point where it hardly will even connect at all and I've turned it off so that my older tp-link devices are the only APs. We've had hot weather, and I wonder if that's relevant because it was never this bad before.

Rebooting the WRT device seems to fix the problem for a few hours. [...]
2018  forumthread  wifi  android  issue  router  openwrt  workaround  tips  configuration  sysadmin  networking  hardwaresupport 
5 weeks ago by ezequiel
pzolee / tcpserver / wiki / Home — Bitbucket
Introduction

This program is designed for WiFi Speed Test for Android application for server side of local computers.

If you have never heard about this program, you can find more details and information in my blog: https://pzoleeblogen.wordpress.com/2013/11/26/wifi-speed-test-for-android-how-to/

http://pzoleeblogen.wordpress.com/category/wifi-speed-test-2/
internet  performance  wifi  networking  tool  free  python  linux  windows  android.app  benchmark  bitbucket  links  support 
6 weeks ago by ezequiel
Setting up wireless roaming using 802.11r fast transition on OpenWRT · morph027
Ages ago, i was setting up 802.11r the complicated way using all the r0kh and r1kh lists across all access points, which worked well but was a little pita to setup.

After creating a little helper, i just discovered that recent OpenWRT builds can cope with the option ft_psk_generate_local to dynamically create the RADIUS keys and stuff. Even with Luci support, just enable 802.11r Fast Transition and Generate PMK locally, set a Mobility Domain (same across all AP’s per SSID) and a NAS ID (unique, i’d still prefer the BSSID w/o the colons) and it works out of the box.
openwrt  wifi  configuration  security  example  tips  linux  router  networking  sysadmin  cli  links  2019  blogpost 
6 weeks ago by ezequiel
Finally got 802.11r roaming working : openwrt
[edit] Since people still find this post for advice, I'll quickly add a few notes.

Configuration has been vastly simplified with a recent OpenWRT release. Basically all you need is the following:

option mobility_domain 'e612' #same for all APs
option ieee80211r '1'
option ft_psk_generate_local '1'
option nasid 'xxxxxxxx' # different for all APs, AFAIK it will automatically derived from the MAC Address if omitted.

All this is availably via LuCI, go to "Wireless Security", enable "802.11r Fast Transition", enable "Generate PMK locally", that should be it. Unfortunately I lack the time and hardware to really test this. [...]
openwrt  wifi  configuration  article  forumthread  reddit  security  example  tips  linux  router  networking  sysadmin  cli  links  2016 
6 weeks ago by ezequiel
Speed test - how fast is your internet? | DSLReports, ISP Information
Test your download, upload and latency from a mobile phone up to optical fiber, and everything between. This test is pure HTML5

This test requires your browser's full attention for accurate results. Run the test when your network is quiet, and don't switch to other applications or change browser tabs during the test. A few Windows security and privacy software packages can block the test or slow the browser.
test  internet  wifi  networking  webapp  html5  performance  benchmark 
6 weeks ago by ezequiel
OpenWrt Project: Dumb AP / Access Point Only
This document describes how to create an Access Point (AP) that extends a network that already has a router, access control, and DHCP in place. People can connect over wireless or Ethernet to the new AP and then to the existing network. In this configuration, the AP is not routing packets, it does not provide DHCP or other functions. The result is a bridged LAN (no internal subnets) that will work fine for home and small networks.
openwrt  wifi  howto  networking  sysadmin  configuration  example  cli  router  guide  documentation  tips 
6 weeks ago by ezequiel
OpenWrt Project: Configure a guest WLAN
Guest WLAN provides internet access to your network members. It also provides firewall security rules to isolate your guest network from the rest. This recipe contains information provided by our forums members and one blogger as shown below: [...]
tutorial  guide  sysadmin  configuration  openwrt  wifi  router  howto  screenshots  tips  example  firewall  networking  security  links  cli  tools 
7 weeks ago by ezequiel
OpenWrt Project: Configure a guest WLAN using the LuCI web interface
Guest WLAN provides internet access to your network members. It also provides firewall security rules to isolate your guest network from the rest. This recipe is based on the more comprehensive Guest WLAN page, providing a more user-friendly approach through the LuCI web interface.
tutorial  guide  sysadmin  configuration  openwrt  wifi  router  howto  screenshots  webapp  tips  example  firewall  networking  security  links 
7 weeks ago by ezequiel
OpenWrt Project: TP-Link TL-WA901ND
The TL-WA901ND is a lowcost b/g/n wireless access point, capable of running OpenWrt.
tp-link  hardware  spec  hardwaresupport  openwrt  router  links  networking  wifi  guide  firmware  atheros  downloads  cli  example  sysadmin  hacking  install  installation 
7 weeks ago by ezequiel
OpenWrt Project: Netgear DG834G v3
The Netgear DG834G v3 is an AR7-based ADSL router with 802.11g wireless and ADSL2+ support. It has a 4-port switch, and the wireless antenna is connected to an RP-SMA connector at the rear.
router  spec  hardware  hardwaresupport  links  openwrt  networking  wifi  wikientry  howto  guide  images  firmware  hacking  archived.version  electronics 
7 weeks ago by ezequiel
O2 wireless box - Wikipedia
The O2 Wireless Box is a wireless residential gateway router distributed by O2. The latest version is based on the 802.11n standard and also supports 802.11g and 802.11b devices.[1] The device connects to the Internet using either an ADSL2+ or ADSL connection.
router  hardware  spec  links  uk  wikientry  wikipedia  wifi 
7 weeks ago by ezequiel
Thomson TG585 v7 [Old OpenWrt Wiki]
NOT supported. However Openwrt can be installed in this router, read this forum thread. You may need to replace your bootloader.
router  hardwaresupport  wikientry  openwrt  2016  links  firmware  spec  wifi 
7 weeks ago by ezequiel
OpenWrt Project: TP-Link TL-WDR4300
TP-Link TL-WDR4300 has 802.11n Dual Band (concurrent) WiFi and Gigabit Ethernet. Advertised as 750 Mbps it is Dual-Stream (2×2) on the 2.4 GHz Band and Triple-Stream (3×3) on the 5 GHz Band. Same as the TL-WDR4310 Released earlier this year in China.
tp-link  hardwaresupport  firmware  openwrt  opensource  howto  install  installation  guide  article  sysadmin  networking  wifi  links  downloads 
7 weeks ago by ezequiel
OpenWrt Project: Welcome to the OpenWrt Project
The OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
openwrt  router  opensource  firmware  multiplatform  links  documentation  reference  hardwaresupport  linksys  install  installation  downloads  community  faq  wifi  networking  embedded  linux  packages  software 
9 weeks ago by ezequiel
How to change Wi-Fi password? - Help and Support / Raspberry Pi - OSMC Forums
My OSMC setup was doing well and then yesterday I changed my Wi-Fi password for security reasons and wanted to change it on my Raspberry Pi using the GUI with My OSMC but the connexion times out when I try to enter the new password and I can not forgot my WiFi network within My OSMC …
2017  raspberrypi  networking  raspbian  configuration  wifi  security  sysadmin  howto  tips  forumthread 
june 2019 by ezequiel
Setting up your network connection - General - OSMC
Before installing OSMC
As part of the OSMC installer you can specify networking options and as part of the first boot the system will attempt to configure them

To do this on the page after you have selected where you want OSMC installed you can select wired connection or wireless connection. By default both wired and wireless connection will default to DHCP configuration.
osmc  networking  tcpip  dns  configuration  tips  sysadmin  example  screenshots  article  installation  wifi  raspberrypi 
june 2019 by ezequiel
network manager - Where does NetworkManager store WiFi passwords on Ubuntu 15.10? - Ask Ubuntu
Q: I had previously learned that NetworkManager stores WiFi passwords in /etc/NetworkManager/system-connections/<wifi name> file. But in my case on Ubuntu 15.10 I can't find any password in that file. [...]
2015  forumthread  stackexchange  networking  gnome  security  wifi  sysadmin  linux 
june 2019 by ezequiel
raspbian - How do I set up networking/WiFi/static IP address? - Raspberry Pi Stack Exchange
A: This tutorial describes how to setup networking using the default network manager dhcpcd included in Raspbian since 2015-05-05.
It applies to the Foundation releases of Raspbian Stretch, Raspbian Jessie and the last Raspbian Wheezy. [...]
raspbian  raspberrypi  networking  sysadmin  linux  debian  howto  tips  example  links  configuration  dhcp  wifi  dns  stackexchange  forumthread  2015 
may 2019 by ezequiel
networking - Wifi doesn't work after suspend after 16.04 upgrade - Ask Ubuntu
Q: This particular version of the "doesn't work after suspend" came after upgrading to 16.04. It seems that the upgrade includes a Wicd applet (added to Metacity Classic Gnome task bar alongside regular network icon), but doesn't seem to work after a suspend. A sudo service network-manager restart duplicates this problem. It takes a complete reboot to get Wifi going again. Any ideas why?
ubuntu  stackexchange  forumthread  issue  workaround  script  tips  sysadmin  wifi  networking  systemd  debian  2016  ubuntu.xenial 
december 2016 by ezequiel
Sys-Admin Dispenses Passwords With a Banana - Slashdot
A network administrator in Denmark is requiring users to perform a finger press on a banana to receive their Wi-Fi passwords. [...]
slashdot  2016  wifi  security  funny  forumthread  links  pictures 
january 2016 by ezequiel
List of WLAN channels - Wikipedia, the free encyclopedia
This list of WLAN channels is the set of legally allowed wireless local area network channels using IEEE 802.11 protocols, mostly sold under the trademark Wi-Fi.
networking  wikipedia  article  wifi  english  tech  wikientry 
september 2015 by ezequiel
Keeping WiFi connection after logout from Window 7 session - Server Fault
Q: I have a bunch of Windows 7 laptops connected to WiFi (WPA2 PSK). When the user log-in, the connection is automatically created (the connection profile is saved). But when the user logs out, the connection automatically closed. Is there any way to keep the connection (until somebody connects to different network)?
windows  windows7  wifi  issue  sysadmin  configuration  networking  workaround  forumthread  stackexchange 
july 2015 by ezequiel
Can someone help me install wifi driver please? « SliTaz Forum
hi. i would like to install slitaz however i will not do it until i get a wifi fix for my machine. 4.0 core boots fine but wifi driver is not supported or something. [...]
wifi  hardwaresupport  hp2133  forumthread  linux  slitaz  howto  guide  tips  sysadmin  drivers  links  packages 
january 2015 by ezequiel
Open Wireless Movement
Imagine a future with ubiquitous open Internet.

We envision a world where, in any urban environment:

* Dozens of open networks are available at your fingertips.
* Tablets, watches, and other new devices can automatically join these networks to do nifty things.
* The societal expectation is one of sharing, and, as a result, wireless Internet is more efficient.
* The false notion that an IP address could be used as a sole identifier is finally a thing of the past, creating a privacy-enhancing norm of shared networks.

We're working with a coalition of volunteer engineers to build technologies that will let users open their wireless networks without compromising their security or sacrificing bandwidth. And we're working with advocates to help change the way people and businesses think about Internet service.
wifi  freedom  firmware  hardwaresupport  opensource  router  development  community 
july 2014 by ezequiel
Wireless distribution system - Wikipedia, the free encyclopedia
A wireless distribution system (WDS) is a system enabling the wireless interconnection of access points in an IEEE 802.11 network. It allows a wireless network to be expanded using multiple access points without the traditional requirement for a wired backbone to link them. The notable advantage of WDS over other solutions is it preserves the MAC addresses of client frames across links between access points.
wireless  networking  wifi  article  wikipedia  tech  it  wikientry  english 
may 2013 by ezequiel
List of Three Stream Hardware - WikiDevi
The 802.11n specification allows for up to four streams. Current cutting edge wireless hardware is just starting to implement three-stream technology which is theoretically capable of up to 450Mbps transfer rates.
hardwaresupport  hardware  intel  atheros  spec  links  tech  wikientry  networking  wireless  wifi  wifi.threestream 
august 2012 by ezequiel
WikiDevi
WikiDevi is a user-editable database for computer hardware based on MediaWiki and Semantic MediaWiki.
wireless  wifi  interesting  searchable  reference  hardwaresupport  spec  hardware  wiki 
august 2012 by ezequiel
Download - Linux Wireless
You can now download a package which lets you compile and install the latest advances on the Linux 802.11 and Bluetooth subsystem and get some of our latest drivers without having to recompile your entire kernel. This package adds mac80211, mac80211 drivers, any new FullMAC driver which has had fairly recent updates, and as of the 2.6.33-rc series it also started backporting the Bluetooth subsystem and providing updates to the entire Bluetooth subsystem as well as the drivers on it. [...]
drivers  driver  fedora  debian  ubuntu  faq  hardwaresupport  kernelpatches  kernelmodule  kernel  build  guide  howto  source  wireless  wifi  linux  download 
august 2012 by ezequiel
Ubuntu -- Details of source package linux-meta in lucid
source package that produces many binary packages, including: linux-backports-modules-wireless-{version}-lucid-server
hardwaresupport  links  security  kernel  kernelmodule  wireless  wifi  ubuntu  packages  package  source  ubuntu.lucid 
august 2012 by ezequiel
« earlier      
per page:    204080120160

Copy this bookmark:





to read