recentpopularlog in

kme : livecd   28

SystemRescueCd - Installing SystemRescueCd on a USB stick | http://www.system-rescue-cd.org/
Follow this method is you want to boot the USB device in UEFI mode. The idea is to create a FAT32 partition on the device where the firmware will find Grub. For the UEFI firmware to use this partition as the EFI filesystem is must have the right flags in the partition table. The USB device can have additional partitions.

- **Download** the latest SystemRescueCd ISO image from the [download page](http://www.system-rescue-cd.org/Download/)
- **Create a msdos** disklabel on the USB device using a tool such as parted or gparted
- **Create a FAT32 partition** with at least 2GB on the USB device and set `SYSRCDXYZ` as the filesystem label
- **Set the boot and lba flags on the FAT32 partition** using a tool such as parted or gparted
- **Copy all files from the ISO image to the FAT32 partition** from a terminal with both devices mounted

In the previous steps `SYSRCDXYZ` refers to the version number, eg: `SYSRCD601` for SystemRescueCd-6.0.1.
disasterrecovery  bootable  uefi  livecd  liveusb  linux  iso  howto  solution 
12 weeks ago by kme
usb flash drive - Can I convert a USB-stick to an installer without losing data? - Super User
Unetbootin does not simply write the ISO images to the target drive, which would overwrite existing data. Rather, it extracts the contents from the image, copies them, and writes its own boot sector afterwards. A quick test run confirms that Unetbootin keeps existing files in place.
livecd  usb  bootable  windows  solution 
november 2016 by kme
SystemRescueCd - View topic - usb_install.sh syslinux failed.
"after several attempts of manual installing syslinux I got it:

# bash ./usb_inst.sh syslinux /dev/sdf1
umount: /tmp/syslinux.mnt.23222.0: device is busy.
(In some cases useful info about processes that use
the device is found by lsof(8) or fuser(1))
syslinux failed to prepare /dev/sdf1
# bash ./usb_inst.sh syslinux /dev/sdf1
usb_inst.sh: error: /dev/sdf1 is already mounted, cannot continue
# umount /dev/sdf1
# bash ./usb_inst.sh syslinux /dev/sdf1
umount: /tmp/syslinux.mnt.23418.0: device is busy.
(In some cases useful info about processes that use
the device is found by lsof(8) or fuser(1))
syslinux failed to prepare /dev/sdf1
# umount /dev/sdf1
# bash ./usb_inst.sh syslinux /dev/sdf1
syslinux has successfully prepared /dev/sdf1"

So, just try it a few times.
sysresccd  bootable  livecd  rescuecd  systemrecovery  disasterrecovery  solution 
may 2013 by kme

Copy this bookmark:





to read