recentpopularlog in

kme : uefi   3

SystemRescueCd - Installing SystemRescueCd on a USB stick |
Follow this method is you want to boot the USB device in UEFI mode. The idea is to create a FAT32 partition on the device where the firmware will find Grub. For the UEFI firmware to use this partition as the EFI filesystem is must have the right flags in the partition table. The USB device can have additional partitions.

- **Download** the latest SystemRescueCd ISO image from the [download page](
- **Create a msdos** disklabel on the USB device using a tool such as parted or gparted
- **Create a FAT32 partition** with at least 2GB on the USB device and set `SYSRCDXYZ` as the filesystem label
- **Set the boot and lba flags on the FAT32 partition** using a tool such as parted or gparted
- **Copy all files from the ISO image to the FAT32 partition** from a terminal with both devices mounted

In the previous steps `SYSRCDXYZ` refers to the version number, eg: `SYSRCD601` for SystemRescueCd-6.0.1.
disasterrecovery  bootable  uefi  livecd  liveusb  linux  iso  howto  solution 
11 weeks ago by kme

Copy this bookmark:

to read