recentpopularlog in
« earlier   later »
The world of polyethylene foam
PE Foam production

PE foam is mainly produced through extrusion technologies. The foams are created by first dissolving and mixing a gas in the molten PE, secondly expanding the gas into a lot of small bubbles or cells and finally cooling the expanded PE and thereby creating the final foam. The foam can be shaped in different semi-finishedproducts such as tubes, profiles, sheets and blocks. The expansion results in a substantial reduction of the polyethylene density. Low Density PolyEthylene (LDPE) as the raw material for these foam has typically a specific density of 920 kg/m3. On the other hand the average density of PE foams is 30 kg/m3. This weight reduction is obtained by expanding the PE approximately 30 times. But it is not only the weight that is changed during the foam process. The new properties that are gained by the PE in its foamed state are jointly responsible for the many applications of this product.
The  world  of  polyethylene  foam  sabic  epe  properties  density 
january 2011
Museums on Us®
free general admission to first full weekend every month
Museums  on  Us®  museum  boa 
january 2011
Low Density Polyethylene Packaging Grade Foam
Material Physical Properties
for Low Density Polyethylene Packaging Grade Foam
Molded from ARPAK Expanded Polyethylene Beads
PHYSICAL
Low  Density  Polyethylene  Packaging  Grade  Foam  filetype:pdf  media:document 
january 2011
epe foam msds - Google Search
expanded polyethelene

msds not available at this site
epe  dell  foam  noodle  msds  filetype:pdf  media:document 
january 2011
STATE OF CALIFORNIA, DEPARTMENT OF CONSUMER AFFAIRS, TECHNICAL BULLETIN 117
STATE OF CALIFORNIA
DEPARTMENT OF CONSUMER AFFAIRS
BUREAU OF HOME FURNISHINGS
AND THERMAL INSULATION
3485 ORANGE GROVE AVENUE
NORTH HIGHLANDS, CA 95660-5595

TECHNICAL BULLETIN 117

Requirements, Test Procedure and Apparatus for
Testing the Flame Retardance of Resilient Filling Materials
Used in Upholstered Furniture
TECHNICAL  BULLETIN  117  flame  flammability  california  foam  filling  material  upholstered  furniture  fitted  sheet  ;  not  cpsc  filetype:pdf  media:document 
january 2011
Federal Trade Commission
1) What is an RN Number?
RN stands for Registered Identification Number. It is a number issued by the FTC to U.S. businesses that manufacture, import, distribute, or sell products covered by the Textile, Wool, and Fur Acts. Businesses can use this number on product labels in lieu of the company name.
textile  federal  rn#  registered  number  fitted  sheet  bedsheet  bed 
january 2011
Welcome to Family Handyman Customer Care
Account Summary;;;
Account Number: 94002508;;;
Account Status: PAYMENT PENDING;;;
Expire Issue: NOV 2012;;;
Last Payment Amount: $0.00;;;
Outstanding Balance: $19.98;;;
Mailing Address: Feeraj Hingh
6000 Breezy Bay Pt
Mcdonough, GA 30253;;;
E-mail Address: theFamilyHandyman.com@usa123456789.com;;;
Have a new e-mail address?
Click here to update.;;;

2011_02_27, Your payment for $19.98 has been received. Please allow 2-3 business days for your payment to be processed. If you receive an additional billing notice for your gift subscription, please disregard it.
magazine  the  family  handyman 
december 2010
« earlier      later »
per page:    204080120160

Copy this bookmark:





to read