recentpopularlog in

neerajsinghvns : continue   1

Manuals | HL-L2305W | United States | Brother
http://support.brother.com/g/b/manualtop.aspx?
c=us&lang=en&prod=hll2305w_us&src=doc;;; tags:Manuals,HL-L2305W,2305,Brother,laser,printer,monochrome,mono,chrome,user,manual,;;;
-
https://help.brother-usa.com/app/answers/detail/a_id/79149/~/toner-continue-mode ;;;
-
tags: user Manual manuals userManual on the web HL-L2305W 2305 Brother laser printer monochrome mono chrome continue continuous mode ;;;
---
The print life of Brother toner cartridges is based upon the their ability to continue to achieve guaranteed print quality. If you choose to continue printing with the toner cartridge beyond its estimated print life, you may do so by enabling Continue Mode.

- Continue Mode will force the machine to continue printing after the "Replace Toner" message on the Status Monitor indicates that the toner cartridge must be replaced.

- Poor print quality is likely to occur when using Continue Mode to print beyond the rated life of the toner cartridge.

- Since Continue Mode allows the toner cartridge to continue print beyond the estimated life of the cartridge, print quality cannot be guaranteed while printing in this mode.

- While in Continue Mode, the Status Monitor will continue to indicate the status of the toner cartridge by displaying the "Toner Low", "Replace Toner" or "Toner Ended" messages.

- The message "Toner Ended" (Solid Toner and Paper LEDs) indicates that Continue Mode was enabled to force the machine to continue printing after the toner cartridge reached the end of its estimated life and now the maximum operational life of the toner cartridge has been reached. The toner cartridge will need to be replaced with a new Brother TN630 or TN660 toner cartridge before the machine will be able to continue printing.

- When a new toner cartridge is installed, this mode will automatically turn off.

To enable Continue Mode, perform the following steps:

1. Make sure the front cover is closed and the power cord is plugged in.

2. Make sure only the Ready LED lights up.

3. Press Go seven times. All LEDs blink twice when you turn on the Continue Mode.

To disable Continue Mode, perform the following steps:

1. Make sure the front cover is closed and the power cord is plugged in.

2. Make sure only the Ready LED lights up.

3. Press Go seven times. All LEDs blink once when you turn off the Continue Mode

Click here to display all models covered by this answer.
Products
Mono Laser Printer
HLL2300D
HLL2320D
user  Manual  manuals  userManual  on  the  web  HL-L2305W  2305  Brother  laser  printer  monochrome  mono  chrome  continue  continuous  mode 
march 2015 by neerajsinghvns

Copy this bookmark:





to read